how to upload a website from dreamweaver to godaddy

Ready FTP, SFTP, WebDav, or RDS connections to upload or download files from the publishing spider web server.

A remote server (often referred to every bit a web server or a publishing server) is where you publish your site files so that people tin view them online. This remote server is only some other computer similar your local computer with a collection of files and folders on it, such as an FTP server.

Specify a folder for your site on the remote server, just as you specified a binder for your local site on your local computer. Dreamweaver refers to the specified remote folder equally your remote site.

When you set up a remote folder, you also select a connection method for Dreamweaver to upload and download files to and from your web server. The most typical connexion method is FTP, only Dreamweaver also supports local/network, FTPS, SFTP, WebDav, and RDS connection methods. If y'all don't know which connectedness method to use, ask your Internet service provider or your server administrator.

Dreamweaver also supports connections to IPv6-enabled servers. Supported connectedness types include FTP, SFTP, WebDav, and RDS. For more data, see www.ipv6.org/.

Prerequisites

Before yous get-go, you must have admission to a remote web server—such every bit a hosting company'south server, a server endemic by the client you're working for, or an intranet server within your company.

If you do not have admission to a server, contact your Internet service provider, your client, your system administrator, or one of the many hosting companies that provide web hosting packages.

You too must accept defined a local site before you proceed. For more information on defining a local site, see Set up a local version of your site.

Specify connection to the remote server

Yous tin can connect to a remote (or a publishing server) using different connection methods depending on your gear up upwards.

The most common used connection method is FTP. However, you can likewise employ more secure connection methods such as Secure FTP (SFTP) or FTP over SSL (FTPS).

If you are using a folder inside your network as the remote server, so you can opt for local or network connections.

Other connection methods supported are Remote Development Services (RDS), and Web-based Distributed Authoring and Versioning (WebDAV) protocol.

If you are not sure nearly the connection method to choose, enquire your Internet service provider or server administrator.

Use the filters beneath to navigate to view only the connectedness method you desire to apply, or simply read on.

Specify a connexion method

FTP connections

Use this setting if yous connect to your web server using FTP.

Notation: Business Goad supports only SFTP. If you are using Business organisation Catalyst, meet the section on SFTP connections on this folio.

Select Site > Manage Sites.

Click New to set up a new site, or select an existing Dreamweaver site and click the edit icon.

In the Site Setup dialog box, select the Servers category and do one of the following:

• Click the Add New Server push to add together a new server.
• Select an existing server and click the Edit Existing Server button.

Here is a sample Server set up screen showing the basic setup options with the text fields populated.



Setting upwardly FTP connections

In the Server Proper name text box, specify a proper noun for the new server. You lot can choose whatever name that you lot require.

Select FTP from the Connect Using pop-up menu.

In the FTP Accost text box, enter the address of the FTP server to which you upload files for your website.

Your FTP address is the full Internet name of a figurer organisation, such as ftp.mindspring.com. Enter the full address without whatsoever additional text. In detail, don't add a protocol proper noun in front end of the address.

If you practise non know your FTP accost, contact your web hosting visitor.

Port 21 is the default port for receiving FTP connections. You can change the default port number by editing the text box to the correct. The result when yous save your settings is a colon and the new port number appended to your FTP address (for example, ftp.mindspring.com:29).

In the Username and Password text boxes, enter the username and password that y'all employ to connect to the FTP server.

You must obtain the FTP address, username and countersign information from the system administrator for the company hosting your site. No one else has access to this information. Enter the information exactly as your arrangement ambassador gives it to yous.

Click Test to test your FTP address, username, and password.

Dreamweaver saves your countersign past default. Deselect the Save option if yous adopt that Dreamweaver prompt you for a password each time you connect to the remote server.

In the Root Directory text box, enter the directory (binder) on the remote server where you store documents that are visible to the public.

If you are uncertain well-nigh what to enter as the root directory, contact the server's administrator or leave the text box blank. On some servers, your root directory is the aforementioned as the directory you beginning connect to with FTP. To discover out, connect to the server. If a folder with a name like public_html, or www, or your user name, appears in the Remote File view in your Files console, that's probably the directory you should enter in the Root Directory text box.

In the Web URL text box enter the URL of your website (for example, http://www.mysite.com). Dreamweaver uses the Web URL to create site root-relative links, and to verify links when you utilize the link checker.

For a more extensive caption of this choice, meet Advanced Settings category.

Aggrandize the More Options section if you still demand to set more than options.

Select Employ Passive FTP if your firewall configuration requires use of passive FTP.

Passive FTP enables your local software to ready the FTP connection rather than requesting the remote server to set it up. If you are not sure whether you utilize passive FTP, bank check with your organisation administrator.

For more information on passive FTP, see What is Passive FTP?

Select Use IPv6 Transfer Mode if you are using an IPv6-enabled FTP server.

With the deployment of version 6 of the Internet Protocol (IPv6), EPRT and EPSV have replaced the FTP commands PORT and PASV, respectively. Thus, if you are trying to connect to an IPv6-enabled FTP server, you must use the extended passive (EPSV) and the extended active (EPRT) commands for your data connection.

For more information, see world wide web.ipv6.org/.

Select Use Proxy if yous desire to specify a proxy host or proxy port.

For more information, click the link to go to the Preferences dialog box, and then click the Assist button in the Site category of the Preferences dialog.

Click Save to shut the Basic screen. Then in the Servers category, specify whether the server you merely added or edited is a remote server, a testing server, or both.

For Help with troubleshooting FTP connectivity bug, see Troubleshoot FTP issues in Dreamweaver.

SFTP connections

Utilise Secure FTP (SFTP) if your server/firewall configuration requires the utilise of secure FTP. SFTP uses encryption and identity keys to secure a connectedness to your remote/testing server.

Your server must be running an SFTP service for yous to select this option. If you don't know whether your server is running SFTP, check with your server administrator.

You can now authenticate connections to an SFTP server based on an 'Identity Key' (with or without a passphrase).

Dreamweaver supports only OpenSSH key files.

Select Site > Manage Sites.

Click New to set upwards a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do 1 of the following:

• Click the Add New Server push to add a new server.
• Select an existing server and click the Edit Existing Server button.

In the Server Name text box, specify a proper name for the new server. The proper noun tin can exist anything of your choosing.

Select SFTP from the Connect Using pop-upwards menu.

Specify the other options in the dialog box based on one of the applicable scenarios beneath:

• Scenario 1: No primal, but have user proper noun and password
• Scenario ii: Accept a fundamental that does not crave a passphrase
• Scenario 3: Take a key that requires a passphrase
  

Scenario ane

Y'all practise non have a key and want to establish an SFTP connection using simply the credentials - combination of user name and password. In this case, use the "Username and Password" authentication method.

Site setup with SFTP connection - user proper name and password

In the Server Proper name text box, specify a name for the new server. This name is used internally by Dreamweaver to identify the server, and so you tin choose any proper noun you like.

From the Connect listing, click SFTP, and enter a valid SFTP accost and port.


For the authentication method, click Username and Password, and then provide the user name and password.


To verify the connection, click Test.

Enter a valid Root Directory.

Scenario two

You accept a key that does non require a passphrase. And, you want to establish an SFTP connexion using the combination of user name and Identity File. In this case, employ the "Individual Primal File" hallmark method.

In the Server Name text box, specify a name for the new server.

This name is used internally by Dreamweaver to place the server, so yous can choose whatever proper name you lot like.

From the Connect list, click SFTP, and enter a valid SFTP address and port.


For the authentication method, click Individual Cardinal File, and then provide the following:

• User proper name
• A valid Identity File
• Leave the Passphrase blank and select Save Passphrase
  



Site setup with SFTP connection - Identity File

Dreamweaver supports only OpenSSH key files.

To verify the connexion, click Test.

Enter a valid Root Directory.

Scenario 3

You have a key that requires a passphrase. And, you want to establish an SFTP connection using the combination of user proper name, Identity File, and the Passphrase for the key. In this case, use the "Private Key File" authentication method.

In the Server Name text box, specify a name for the new server. This name is used internally by Dreamweaver to identify the server, so you can choose any name you similar.

From the Connect list, click SFTP, and enter a valid SFTP address and port.


For the hallmark method, click Private Key File, and then provide the post-obit:

• User name
• A valid Identity File
• Passphrase for the Identity File
  



Site setup with SFTP connection - Identity File

Dreamweaver supports only OpenSSH key files.

To verify the connection, click Test.

Enter a valid Root Directory.

Port 22 is the default port for receiving SFTP connections.

Set the rest of the options the same way equally you lot would for FTP connections. For more than information, see FTP connections.

FTPS connections

FTPS (FTP over SSL) provides both encryption and authentication back up as compared to SFTP that offers only encryption support.

When using FTPS for information transfer, you can choose to encrypt your credentials, and also the information being transmitted to the server. In addition, you lot can cull to authenticate the server's credentials and connections. The credentials of a server are validated confronting the current set of trusted CA server certificates in the Dreamweaver database. Certificate Authorities (CAs), which include companies like VeriSign, Thawte, then on, issue digitally signed server certificates.

This procedure describes options specific to FTPS. For information on regular FTP options, meet FTP connections.

Select Site > Manage Sites.

Click New to set up a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do one of the following:

• Click the "+" (Add together New Server) push button to add a new server.

• Select an existing server and click the Edit Existing Server button.

In Server Name, specify a name for the new server.

In Connect Using, select one of the following based on your requirement.

FTP over SSL/TLS (Implicit Encryption)

The server terminates the connectedness if the security request is not received.

FTP over SSL/TLS (Explicit Encryption)

If the client does not request for a secure connection, the server tin can proceed with an insecure transaction, or reject/limit the connectedness.

In Hallmark, choose ane of the following options:

None

The server's credentials, signed or self-signed, are displayed. If you have the server's credentials, the document is added to a certificate store, trustedSites.db, in Dreamweaver. When you connect to the aforementioned server the next time, Dreamweaver straight connects to the server.

If the credentials of a self-signed certificate have changed on the server, you are prompted to accept the new credentials.

Trusted

The presented certificate is validated with the current set up of trusted CA server certificates in the Dreamweaver database. The list of trusted servers is stored in the cacerts.pem file.

An error message is displayed if you select Trusted Server, and connect to a server with a self-signed certificate.

Aggrandize the More Options section to gear up more options.

Use Passive FTP

if your firewall configuration requires use of passive FTP. Passive FTP enables your local software to set the FTP connexion rather than requesting the remote server to ready it upwardly. If you are not sure whether you lot utilize passive FTP, check with your system ambassador.

For more information on passive FTP, encounter What is Passive FTP?

Encrypt Only Command Channel

Select this option if y'all want to encrypt only the commands that are being transmitted. Employ this option when the data being transmitted is already encrypted, or does not contain sensitive information.

Encrypt Only User Proper noun and Password

Select this selection if you want to encrypt only your user name and password.

Apply IPv6 Transfer Mode

Set this pick if you are using an IPv6-enabled FTP server.

With the deployment of version six of the Internet Protocol (IPv6), EPRT and EPSV have replaced the FTP commands PORT and PASV, respectively. Thus, if you lot are trying to connect to an IPv6-enabled FTP server, you lot must use the extended passive (EPSV) and the extended active (EPRT) commands for your information connexion. For more information, run across www.ipv6.org/.

Click Salvage to close the Basic screen. Then in the Servers category, specify whether the server you added or edited is a remote server, a testing server, or both.

For Help with troubleshooting FTP connectivity problems, see Troubleshoot FTP issues in Dreamweaver.

Local or network connections

Utilize this setting to connect to a network folder, or if you are storing files or running your testing server on your local computer.

Select Site > Manage Sites.

Click New to set up a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do one of the following:

• Click the Add New Server button to add a new server.
• Select an existing server and click the Edit Existing Server button.

In the Server Proper noun text box, specify a name for the new server. This proper noun is used internally past Dreamweaver to identify the server, so you can choose whatever name you lot like.

Select Local/Network from the Connect Using pop-up menu.

Click the binder icon beside the Server Folder text box to browse to and select the folder where y'all store your site files.

In the Web URL text box enter the URL of your website (for example, http://www.mysite.com). Dreamweaver uses the Web URL to create site root-relative links, and to verify links when you use the link checker.

For a more extensive explanation of this option, see Avant-garde Settings category.

Click Save to close the Bones screen. So in the Servers category, specify whether the server you lot just added or edited is a remote server, a testing server, or both.

In the Servers category in the Site Setup dialog box, specify whether the server you added or edited is a remote server, a testing server, or both.

WebDAV connections

Employ this setting if you connect to your web server using the Web-based Distributed Authoring and Versioning (WebDAV) protocol.

For this connection method, yous must accept a server that supports this protocol, such as Microsoft Internet Information Server (IIS) 5.0 or an appropriately configured installation of Apache web server.

If you select WebDAV every bit your connexion method, and you are using Dreamweaver in a multiuser environment, yous should also make sure that all of your users select WebDAV as the connexion method. If some users select WebDAV, and other users select other connection methods (FTP, for example), Dreamweaver's check-in/check-out feature will not work as expected, since WebDAV uses its own locking system.

Select Site > Manage Sites.

Click New to ready up a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do 1 of the post-obit:

• Click the Add together New Server button to add together a new server

• Select an existing server and click the Edit Existing Server button

In the Server Name text box, specify a proper name for the new server. The proper name can exist anything of your choosing.

Select WebDAV from the Connect Using pop-upwardly menu.

For the URL, enter the complete URL to the directory on the WebDAV server you want to connect to.

This URL includes the protocol, port, and directory (if not the root directory). For instance, http://webdav.mydomain.internet/mysite.

Enter your username and countersign.

This information is for server authentication and is not related to Dreamweaver. If yous are not certain of your username and password, check with your organisation administrator or webmaster.

Click Test to test your connection settings.

Select the Save option if you lot want Dreamweaver to remember your countersign each time y'all offset a new session.

In the Web URL text box enter the URL of your website (for example, http://www.mysite.com). Dreamweaver uses the Web URL to create site root-relative links, and to verify links when yous use the link checker.

For a more all-encompassing explanation of this pick, see Advanced Settings category.

Click Relieve to close the Basic screen. Then in the Servers category, specify whether the server you just added or edited is a remote server, a testing server, or both.

In the Servers category in the Site Setup dialog box, specify whether the server you added or edited is a remote server, a testing server, or both.

RDS connections

Use this setting if you connect to your web server using Remote Development Services (RDS). For this connection method, your remote server must be on a computer running Adobe® ColdFusion®

Select Site > Manage Sites.

Click New to gear up upwardly a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and practise one of the post-obit:

• Click the Add New Server button to add a new server

• Select an existing server and click the Edit Existing Server button

In the Server Name text box, specify a name for the new server. This name is used internally by Dreamweaver to place the server, and so you can choose any proper name y'all similar.

Select RDS from the Connect Using pop-upwardly card.

Click the Settings button and provide the post-obit information in the Configure RDS Server dialog box:

• Enter the proper name of the host computer where your web server is installed.
• The host name is probably an IP address or a URL. If you are unsure, ask your ambassador.
• Enter the port number that you connect to.
• Enter your root remote folder equally the host directory. For example, c:\inetpub\wwwroot\myHostDir\.
• Enter your RDS username and password.

These options might non appear if you prepare your username and countersign in the ColdFusion Ambassador security settings.

• Click Save if you want Dreamweaver to recall your settings.

Click OK to close the Configure RDS Server dialog box.

In the Web URL text box enter the URL of your website (for instance, http://www.mysite.com). Dreamweaver uses the Spider web URL to create site root-relative links, and to verify links when you lot use the link checker.

For a more extensive explanation of this option, see Advanced Settings category.

Click Save to shut the Basic screen. And so in the Servers category, specify whether the server you lot only added or edited is a remote server, a testing server, or both.

Set Advanced server options

Select Site > Manage Sites.

Click New to set upward a new site, or select an existing Dreamweaver site and click Edit.

In the Site Setup dialog box, select the Servers category and do one of the following:

• Click the Add New Server button to add together a new server

• Select an existing server and click the Edit Existing Server button

Specify Bones options as necessary, and and then click the Avant-garde button.

Select Maintain Synchronization Information if you desire to automatically synchronize your local and remote files. (This option is selected by default.)

Select Automatically Upload Files to Server on Relieve if y'all desire Dreamweaver to upload your file to your remote site when you salvage the file.

Select Enable File Cheque Out if you desire to actuate the Check In/Out system.



Setting avant-garde server connect options

If you are using a Testing server, select a server model from the Server Model pop-up menu. For more than data, see Set upward a testing server.

Connect to or disconnect from a remote binder

Depending on the blazon of connection, you can connect to or disconnect from your remote binder:

FTP, SFTP, FTPS, WebDAV, or RDS connexion:

In the Files panel:

• To connect, click Connects to Remote Host in the toolbar.
• To disconnect, click Disconnect in the toolbar.

Local or network connection:

Y'all do not have to explicitly connect to the remote folder; you are always connected to it. Click the Refresh push to see your remote files.

• To connect, click Connects to Remote Host in the toolbar.
• To disconnect, click Disconnect in the toolbar.

Troubleshoot the remote folder setup

Here are some common bug you may meet in setting upwards a remote binder, and how to resolve them.

• The Dreamweaver FTP implementation might not work properly with certain proxy servers, multilevel firewalls, and other forms of indirect server access. If you meet problems with FTP access, ask your local organisation administrator for aid.
• For a Dreamweaver FTP implementation, yous must connect to the remote system'southward root folder. Be sure to point the remote organisation's root folder equally the host directory. If you've specified the host directory using a single slash (/), you lot might need to specify a relative path from the directory you are connecting to and the remote root folder. For instance, if the remote root binder is a college level directory, y'all may demand to specify a ../../ for the host directory.
• Use underscores in place of spaces, and avoid special characters in file and binder names wherever possible. Colons, slashes, periods, and apostrophes in file or folder names can sometimes cause problems.
• If you run across issues with long filenames, rename them with shorter names. On the Mac OS, filenames cannot be more 31 characters long.
• Many servers use symbolic links (UNIX), shortcuts (Windows), or aliases (Macintosh) to connect a folder on i part of the server's disk with another binder elsewhere. Such aliases normally accept no effect on your ability to connect to the advisable folder or directory; however, if you can connect to one office of the server just not another, there might be an alias discrepancy.
• If you encounter an fault bulletin such as "cannot put file," your remote folder may be out of space. For more detailed information, await at the FTP log.

In general, when you encounter a problem with an FTP transfer, examine the FTP log by selecting Window > Results (Windows) or Site > FTP Log (Macintosh), then clicking the FTP Log tag.

For more information on troubleshooting FTP issues, run across Troubleshoot FTP bug in Dreamweaver.

dubemencre.blogspot.com

Source: https://helpx.adobe.com/in/dreamweaver/using/connect-remote-server.html

Share this post